Wind Turbine Generator 1000 W 24V with Controller

$1,200.00
DESCRIPTION
2
WIND TURBINE GENERATOR 1000 W 24V
TURBINE SET  with:
- Three Pahases Permament Mgnets Generator Body  24V
- Turbine 3 Blades, Steel Hub and Cone
- Wind Turbine Controller +Rectifier + Battery Charge Controller "All-In-One"
with input for auxilary 100W Solar panel
- Dump Load
-Mast not included 
-24 V Battery Bank is NOT INCLUDED.
parameters:
Main technical
Rotor Diameter (m):  
Speed regulation method: Furling/ Tail turning and electro magnetic brake
Generator style: Three phase, rare earth permanent magnets
Working voltage:  24V
Rated rotate speed(r/min): 400
Survived wind speed: 40
Working wind speed (m/s): 3?25
Startup wind speed (m/s): 3
Rated wind speed (m/s): 9
Rated power: 1000W (Max Peak Output 1500W)
Material and number of the blades: Reinforced fibber glass*3
Turbine weight with hub and blades : 68kg
Mast not  included -but available separately  steel, galvanized with guy wires and  accessories -6 meter  high 
Mast weight: 51 kg
If you want to sell electicity to your local Electric company by the grid (similarly to solar panel users)  you need to buy GRID CONECTED INVERTER separately from Australian supplier.
It works similarly to solar panel  installation but require different device specifically design for Wind Power. 
This setup is designed for OFF THE GRID connection to charge
electric company and their power bills forever !
PV panels for these days that is less wind. Then you can say Good Bye to
convert DC 24V to 240 V AC. Usually setup is supplemented with solar
To complete such setup you need battery Bank 12 V , 24V or 48V and Inverter that
with electric power.
your battery bank at home, that feed inverter which supply your home
You may use this also with ON THE GRID setup but to do so
Both you can buy locally made in Australia by Latronics.
-Grid tied inverter
- Wind turbine controller/rectifier 
you need:
Next, quite important for you consider when buying
50-55db measured 10m distance.
your home. That is our blades produce extremely low noise level
that you want the quest possible not constant noise of flying helicopter over
Say nothing about blades, because that is obvious for your
disperse extra power when you battery is fully loaded.
tangling cables, Quality of the Electronic Controller and Dump Loader that
another. Look at Slip Ring Transfer to allow turbine spin on the mast without
need special attention and there is where our turbines excel other
some essential parts that
turbines may not be the cheapest but quality doesn't come cheaply. There are
Some may disintegrate after first storm or worn out quickly. My
are on equally well made.
Wind Turbine Generator. There are a lot on the market to choose from but there
Packaging: 
Installation and shipping costs not included.
 http://www.greenozi.com/greenozi/WIND/manuals.htm
 Gross crate weight : 93 kg
Generator & Blades -
Wooden crates (cm):  
Mast : 2 pieces 3.0 meters each for easy transportation
Mast  weight : approx 51 kg
Total shipping weight: 93+ 51 = 144 kg
For shipping quotation please provide your post code. 
Warranty:
 against manufacturer faults ( does not cover misuse) is 6 month return to base ( no shipping cost covered) for part only to repair or replace.
Two wind turbines in rural settings 1KW and 2KW powering house.
--------------------------------
Also available on eBay Brand New Wind Turbines:
 Mini wind turbine 450W 12V 
New Items ! WIND TURBINE 3kW  48V
New Items ! Wind turbine 2kW 96V
New items ! Wind turbine 2kW 360V
Wind turbine 2kW 48V 
Wind turbine 1kW 48V 
Wind turbine 1000W 24V 
Wind turbine 500W 24V 
Wind turbine 500W 12V 
Wind Turbine 200W 12V 
Mini wind turbine 750W 24V 
Wind turbines 5kW to 20kW on order
Installation of 20KW units require big cranes.
Spare parts: wind generators, blades, controllers, wires, brushes, bearings
Solar panels 100W
Micro hydro generators low and High head 200W (to 20kw on order) 
: green free energy, green power, wind turbine, wind generator, rural living, solar panel, sustainable energy, hydro generators, environment friendly, greenhouse reduction, save world and
Green TAGS
ADDITIONAL INFORMATION
Price
$1,200.00
Condition
New
YOU MAY ALSO LIKE
1-3 ton (32mm pin) Excavator Mechanical Quick Hitch Coupler suit Wacker Neuson 10

1-3 ton (32mm pin) Excavator Mechanical Quick Hitch Coupler suit Wacker Neuson

The price includes GST.
$870.00
Yesterday
Pullenvale , QLD
Used
New 9-22 ton (65mm or 60mm pin) Hydraulic Excavator Quick Hitch Coupler 10

New 9-22 ton (65mm or 60mm pin) Hydraulic Excavator Quick Hitch Coupler

The price includes GST.
$3,350.00
2 days ago
Pullenvale , QLD
New
15-32 ton (80mm pin) Excavator Ripper suit Cat, JCB, Kobelco, Komatsu, Sumitomo 10

15-32 ton (80mm pin) Excavator Ripper suit Cat, JCB, Kobelco, Komatsu, Sumitomo

The price includes GST.
$2,680.00
3 days ago
Pullenvale , QLD
Used
New Jisan 15-32 ton (80mm Pin) Excavator Rotating Hydraulic Sorting Grapple Grab 10

New Jisan 15-32 ton (80mm Pin) Excavator Rotating Hydraulic Sorting Grapple Grab

The price includes GST.
$17,450.00
4 days ago
Pullenvale , QLD
New
New 15-32 ton (80mm pin) SEC Excavator Mechanical Quick Hitch Coupler 10

New 15-32 ton (80mm pin) SEC Excavator Mechanical Quick Hitch Coupler

The price includes GST.
$2,740.00
5 days ago
Pullenvale , QLD
New
Kobelco SK135SR Tracked-Excav Excavator 24

Kobelco SK135SR Tracked-Excav Excavator

KOBELCO SK135SR-2 13.8T EXCAVATORPOWER TILT ROTATING QUICK HITCH WORTH 18K*** VERY SOUGHT AFTER KNUCKLE...
$87,945.00(Drive Away)
1 week ago
Austral , NSW
Used
30-50 ton (100mm pin) OZ Buckets Excavator Auger Headstock Hitch Mount 10

30-50 ton (100mm pin) OZ Buckets Excavator Auger Headstock Hitch Mount

The price includes GST.
$1,870.00
1 week ago
Pullenvale , QLD
New
SHARE
THIS AD
Back to Top