Arcam AVR500 AV Receiver, secondhand @ 50% off RRP

$5,998.00$2,999.00(Sale Price)
DESCRIPTION

If you're looking for a high end receiver with impeccable audio credentials, the Arcam AVR500 simply must be on your short list.
Arcam's emphasis on high quality performance is evident on the AVR500 AV Receiver. Audiophile quality components have been used throughout its design, including state of the art Analog Devices DSP (Digital Signal Processing), Crystal Semiconductor DACs (Digital to Analogue Converters) and precision electronic volume controls. All this plus direct (processing bypass) modes, and a rock solid build quality makes the Arcam FMJ AVR500 equally suitable for both movies and stereo music.
High definition is the AVR500's middle name. It features no less than 5 HDMI inputs and twin outputs (ideal for connecting a television and a projector), supporting full HD 1080p resolutions and the 24 frames per second "native film" format. It also decodes thenew HD Audio formats from Dolby and DTS making it perfect for use with the latest Blu-ray players. With 100 watts per channel of amplification, there's also plenty of power on tap for the most demanding of soundtracks. There are also analogue video inputs including component video and S-video, and with upconversion and upscaling of all inputs to HDMI and 1080p resolutions, whatever you watch, it will look at its best on your HD display.
Arcam's reputation for developing high quality hi-fi and home cinema separates needs no introduction, and their stunning FMJ AVR500 7.1ch Home Cinema Receiver easily lives up to their high performance expectations.
Digital audio features:
Analog Devices ADSP-21366 & ADSP-21367 DSPs used for surround decoding
Crystal Semiconductor DACs, stereo ADC and precision electronic volume controls
Dolby TrueHD, Dolby Digital+, Dolby Digital EX, Dolby Pro Logic IIx, DTS HD Master Audio*
DTS High Resolution Audio, DTS-ES Discrete, DTS-ES Matrix, DTS96/24, DTS Neo:6**
Dolby Volume gain management and Tonal correction processing*
Dolby Volume processing for balancing of program material gain and tonal balance
Adjustable crossover switching 40Hz, 60Hz, 80Hz, 100Hz, 120Hz, 150Hz
8 digital inputs 4 rear optical, 3 co-axial, 1 front 3.5mm optical AUX input
Global audio delay, adjustable from 0-1000 milliseconds, to compensate for video processing delays in digital displays and sources with auto lip-sync for compatible displays
Analogue audio features:
Audiophile quality components for best sound quality
Multi-channel 7.1 analogue input for DVD-A or SACD sources
Stereo direct mode bypasses and disables all digital processing for 2 channel analogue sources
8 stereo analogue inputs (including front 3.5mm AUX input)
Zone 2 stereo audio, from analogue inputs (Source and volume control independent from main zone)
Support for iPod via Arcam rLead / rDock (independent of RS232 connection)

Video features:

5 HDMI inputs (up to 1080p, Deep Colour)
2 HDMI outputs (up to 1080p, Deep Colour)
3 Component inputs, one monitor output (up to 1080i)
2 S-video inputs, one monitor output
2 Composite video inputs, one monitor output
Full video up/down conversion & frame rate conversion of all inputs where technically allowed
Video enhancements (per input): Edge enhancement, Mosquito noise reduction, Random noise reduction, Block noise reduction
Custom Install features:
Independent Zone 2 (audio & video), with fixed/variable volume
RC-5 remote input jacks for both zones
IP control over Ethernet (with optional Ethernet module)
IR pass through for source components
Full suite of discrete IR RC-5 codes, including separate on / off etc
12Volt triggers, on / off for zones 1 and 2
Full duplex RS232 control input for more complex control systems
Audio streaming and Internet radio via Ethernet port (with optional Ethernet module)
General:

Supplied with back-lit CR102 learning remote
Control with support for up to 7 other components and a huge on-board code library
Large, high contrast dimmable VFD front panel display
User switchable between 120 & 230 volt
Mains supplies
Size – 435mm (17.1in) wide, 440mm (17.3in)
Deep, 185mm (7.3in) high
Weight 22kg (48.5lbs) nett, 27kg (59.5lbs) packed
Warranty: 3 month second hand warranty
Original RRP: $5,998
Pay just $2,999 for this ex-demo AV receiver, half the original price! We are clearing the FMJ AVR500 as a secondhand item with 3 month s/hand warranty.
_____________________________________________________________________________
Challenge Hi-Fi Stereo Pty Ltd, Show Address
Phone: (08) Reveal Phone
Email: Send Message
Send Message
Images checked
ADDITIONAL INFORMATION
Price
$2,999.00 (Sale Price)
Location
Australia
Condition
Used
Delivers To
Australia Wide
MORE FROM THIS SELLER See all ads from seller
YOU MAY ALSO LIKE
Opens partner site or view on Puppy List
Opens partner site or view on Puppy List
SHARE
THIS AD
Challenge Hi-Fi Stereo Pty Ltd
  ******7333   show number
Back to Top