UBTECH UBT40S Tractor Front End Loader Silence Hydraulic Post Driving Hammer

$12,500.00
DESCRIPTION

UBTECH UBT40S Tractor Front End Loader Silence Hydraulic Post Driving Hammer ATTUBT
Rock Concrete Breaker WORK READY-----ONLY $12,500.00 +GST
UBTECH UBT40S Tractor Front End Loader Hydraulic Post Driver. Post Driving Hammer to suit 3 to 7 Ton Tractors (FEL).

** Drives Posts 2500m to 3000mm in Overall Length (depending on the specifications of your machine performance will vary)

e.g. Terex PT50 achieves 2.7m overall available height from ground to inside of post driving moil.

UBTECH Hammers are manufactured in South Korea as with hammers available on the market today. PROVEN QUALITY AND VALUE FOR MONEY.

5 Years Warranty on Main Frame & 12 Months Factory Parts Warranty. *Factory warranty does not cover everyday wear parts, consumables or everyday maintenance issues. UBTECH Hammers are the heaviest in the market we have seen. When comparing weights of hammers it is important to consider whether the head bracket, hoses and moil are included!

All hammers are sold WORK READY with no surprise costs when it comes to fitting your hammer to your machine, come complete with moil, hoses and head bracket installed. Hydraulic hoses supplied standard with screw-in fittings. Simply attach to the excavator and begin work with your breaker pre-gassed, flow and pressure tested, and fully adjusted to suit your machine.
______________________________

UBT40S, to suit Toyota Skid steer 5SDK9 5SDK10 5SDK11

. Gross Weight----------------340kg (without Head Bracket, Moil, Pins, Hoses)
. Required Oil Flow----------30 to 70L/min
. Operating Pressure-------95 to 130 bar (1380 to 1885 psi)
. Setting Pressure-----------170 bar (2465 psi)
. Tool Shank Diameter----68mm (2.67 inches)
. Impact Rate------------------500 to 900 bpm
. Hose Diameter-------------12.7mm (1/2 inch)

All units come complete with:
. 1 x Front End Loader Mounting Plate
. 2 x Hydraulic Hoses (1.5m x 1/2'')
. 1 x Tool Kit
. 1 x Recharge Kit
. 1 x Full Seal Kit
. 1 x Chisel Attachment
. 1 x Moil Attachment
. 1 x 100mm Post Driving Moil (75mm Internal Diameter)
. 1 x 226mm Post Driving Moil (200mm Internal Diameter)
ADDITIONAL INFORMATION
Price
$12,500.00
Location
Australia
Condition
New
Delivers To
Australia Wide
MORE FROM THIS SELLER See all ads from seller
YOU MAY ALSO LIKE
Caterpillar 140M Artic Grader Grader 26

Caterpillar 140M Artic Grader Grader

CATERPILLAR 140MENCLOSED AC CABINREAR RIPPERS14FT MOLDBOARDPRICE $189 950 PLUS GSTFINANCE AVAILABLE!...
$208,945.00(Drive Away)
3 hours ago
Austral , NSW
Used
23-48 ton (100mm / 90mm pin) 2600mm OZ Excavator Mud Batter Bucket suit Cat 336 10

23-48 ton (100mm / 90mm pin) 2600mm OZ Excavator Mud Batter Bucket suit Cat 336

The price includes GST.
$4,680.00
6 days ago
Pullenvale , QLD
Used
New 4-6 ton Excavator Hydraulic Thumb Clamp Grab 10

New 4-6 ton Excavator Hydraulic Thumb Clamp Grab

The price includes GST.
$2,050.00
6 days ago
Pullenvale , QLD
New
New Landplane Spreader Leveler for Skid Steer, Tractor, Track Loader 10

New Landplane Spreader Leveler for Skid Steer, Tractor, Track Loader

The price includes GST.
$890.00
1 week ago
Pullenvale , QLD
New
New Landy Skid Steer & Track Loader Tree Stump Removal Scoop Bucket 10

New Landy Skid Steer & Track Loader Tree Stump Removal Scoop Bucket

The price includes GST.
$2,450.00
1 week ago
Pullenvale , QLD
New
New Rock Grapple Sieve Bucket, Tractor, Skid Steer, Track Loader 10

New Rock Grapple Sieve Bucket, Tractor, Skid Steer, Track Loader

The price includes GST.
$3,250.00
1 week ago
Pullenvale , QLD
New
New 1.5 ton Pallet Forks Positioner Skid Steer, Track Loader, Tractor 10

New 1.5 ton Pallet Forks Positioner Skid Steer, Track Loader, Tractor

The price includes GST.
$3,970.00
1 week ago
Pullenvale , QLD
New
New Backhoe Arm for Skid Steer, Tractor, Track Loader 10

New Backhoe Arm for Skid Steer, Tractor, Track Loader

The price includes GST.
$3,850.00
1 week ago
Pullenvale , QLD
New
SHARE
THIS AD
Southern Tool + Equipment Co
  ******8999   show number
Back to Top