GS5424PLC 24 PORT GIGA POE SMART SWITCH 450W GIGABIT

DESCRIPTION

FEATURES

LONG RANGE 24-PORT GIGABIT POE WEB SMART SWITCH WITH 4 GIGABIT RJ45/SFP COMBO PORTS
?Twenty-four Gigabit Ethernet ports and four Gigabit RJ45/SFP combo ports.
IEEE 802.3af/at PoE compliant.
Up to 30W per port (total power budget: 450W) for powering PoE-enabled devices.
Auto-detection of powered devices (PD) and power consumption levels.
PoE powered devices (PD) alive check to enhance the reliability of the network.
Power backfeed protection to avoid damaging the PoE ports.
PoE long range mode with Ethernet cable to extend up to 200 meters.
Dual firmware to reduce down time for the switch.
Voice VLAN to enhance sound quality for IP phones.
DHCP snooping to protect the integrity of legitimate DHCP server and its operations.
Surge protection 6KV to avoid the damage of the switchand connected devices.
Supports SNMP v3, Access Control List (ACL), QoS, CoS,STP, 802.1Q VLAN, IPv4/IPv6, Port Trunk, IGMP v1/v2/v3 Snooping and Mirror.
56Gbps switch capacity.
8K MAC address table and jumbo frame support up to 9KB.
Two fans with hot-swappable fan tray and19-inch 1U rack-mount design.
The Edimax Pro GS-5424PLC smart switch comes withweb-based user interface, 24 Gigabit PoE ports and 4 RJ45/SFP combo ports for high-speed Gigabit and long-range copper or optical connections. With smart features in SNMP v3, PoE PD Alive Check, Dual Firmware, Voice VLAN, DHCP Snooping, QoS, CoS, STP, 802.1Q VLAN, IPv4/IPv6, Port Trunk,IGMP v1/v2/v3 Snooping and Mirror, the smart switch providesa cost effective, reliable, scalable and secure switch solution for SMB networks. The Edimax-specific long range mode enables power and data transmission to up to 200 metersat a speed of 10Mbps, tailored for IP cameras and far away network device applications. The PoE also features auto detection and power backfeed protection to efficiently provide power and, at the same time, avoid damaging the PoE ports. The Edimax GS-5424PLC is the ideal solution to increase the distance/speed of your network server and backbone connections.

GIGABIT HIGH-SPEED CONNECTION
Complies with IEEE802.3/802.3u/802.3ab/802.3z Gigabit Ethernet Standards, the GS-5424PLC features 24 Gigabit Ethernet ports for high-speed, large file transfer and 4 SFP slots for long range optical fiber Gigabit Ethernet connections.

802.3AT POE WITH AUTO DETECTION & POWER BACKFEED PROTECTION
The GS-5424PLC features 24 IEEE 802.3at Power over Ethernet (PoE ) ports which supply up to 30W of electricity per port and has a total power supply of 450W to power any 802.3at or 802.3af compliant power device. With PoE detection capability, the GS-5424PLC is able to verify whether the connected device is IEEE 802.3at or 802.3af compliant. If a PoE device is not detected, only network data will be transmitted. Moreover, with the PoE power backfeed protection from the passive PoE injectors, the GS-5424PLC is able to avoid damaging the PoE ports.
POE FOR EASY INSTALLATION AND BETTER COST EFFICIENCY
Power over Ethernet technology enables the Ethernet cable to carry both data and power, reducing cable installation and eliminating the need for extension cords orelectrical outlets on the walls and ceiling. The GS-5424PLC can effectively lower installation costs and simplify deployment effort. The GS-5424PLC can be used with differentPoE products such as access points, IP cameras or VoIP devices and is an effective solution for network environments where power outlets are difficult to access.

POE POWERED DEVICE ALIVE CHECK
Featuring PoE Powered Device (PD) alive check, the switch can be configured to monitor real-time status of connected PDs by ping action (sending alive-checking packets). If a PD fails to response, the GS-5424PLC PoE Switch will reboot the PD, which enhances the reliability ofthe network and reduces administrator management burden.

LONG RANGE POE DISTANCE EXTENSION, UP TO 200 METERS
The long range mode provides extended power and datadelivery distance to up to 200 meters while general Ethernetswitches have a distance restriction of 100 meters. The longrange mode operates on a per-port basis at 10Mbps full-duplex operation, ideal for devices such as IP cameras,IP phones and PoE-enabled IoT devices at a remote location.
DUAL FIRMWARE
The dual firmware feature allows switches to have two firmware in storage. You can denote one of these firmware as the active one and the other firmware as the backup. If the active firmware faces problems, you can activate the backup firmware right away to reduce down time.

VOICE VLAN
Voice VLAN is a special function of GS-5424PLC switch which allows network administrator to easily prioritize IP voice traffic from IP phone through the accessport of switch to enhance VoIP service. Voice VLAN also provides QoS to VoIP, ensuring that the sound quality of an IP phone does not deteriorate when the IP voice traffic is sent unevenly.

DHCP SNOOPING
The network security feature of DHCP snooping enables the prevention of malicious or malformed DHCP traffic or the mitigation of security risks from rogue DHCP servers. The feature monitors DHCP messages received from untrusted devices connected to a switching device in the network and protects the integrity of legitimate DHCP serverand its operations.

SMART TOOLS FOR IMPROVED NETWORK EFFICIENCY AND SECURITY
The switch features smart and simple network monitoring tools that allow for improved network efficiency and security. The web-based interface management features include QoS (Quality of Service) bandwidth control for better traffic control, VLAN (Virtual LAN) for enhanced network security and multicast IGMP snooping v1/v2/v3 for streaming applications. For quick and easy setup, the web-based management integrates advanced management and security functions of Access Control List (ACL), CoS, STP, IPv4/IPv6, Port Trunk, IGMP v1/v2/v3 Snooping and Mirror.
APPLICATION DIAGRAM
?
OPTIONAL ACCESSORY
?
MG-1000 SERIES V21000BASE-T SX LX SFP MODULES
Compliant with IEEE 802.3z Gigabit Ethernet and Fiber Channel standard
Plug-and-Play & Hot Pluggable
Supports single-mode or multi-mode fiber depends on the SFP modules
Max. cable length: 550m to 30km depends on the SFP modules
Industrial grade SFP modules with robust design for enhanced reliability
*Maximum performance, actual data rates, and coveragewill vary depending on network conditions and environmental factors.
*Actual viewing resolution and frame rate of network cameras depend on connection speed.
*Product specifications and design are subject to changewithout notice.

SPECIFICATIONS

HARDWARE Ports 24x RJ-45 10/100/1000Base-T PoE ports 4 x RJ45/SFP Gigabit combo ports Transmission Method Store and forward Buttons Reset button LED Indicators Per Port: Link/Act PoE: Act/Status Per Unit: Power Power Input 100-240V AC, 50-60 Hz, internal power supply Total Power Budget 450W Fan 2 x Fans with hot-swappable fan tray Surge Protection Support 6KV surge protection on RJ45 port (port 25-28) Dimensions (L x W x H) 441 × 270 × 45 mm Weight 4.36kg PERFORMANCE Switching Capacity 56Gbps Forwarding Rate 35.7 Mpps MAC Address 8K Buffer Memory 1M bit Jumbo Frames 9KB Filtering/Forwarding Rates 1000Mbps port – 1,488,000pps 100Mbps port - 148,800pps 10Mbps port - 14,880pps POWER OVER ETHERNET Standard IEEE 802.3af, IEEE 802.3at Power Output Up to 30W per port Pin Assignment 1/2( ), 3/6(-)End-Span (mode A) Management PoE status, PoE on/off, PoE PD alive check, per port priority setting Long Range Enable long range mode at 10Mbps for cable distance up to 200 meters Backfeed Protection Built-in SMART FEATURES Quality of Service (QoS) Rate limiting on packets sent and received by an interface Eight queues on each port WRR, SP, WRR SP queue scheduling algorithms Re-marking of the 802.1p priority and DSCP priority Rate limiting in each queue and traffic shaping on ports Class of Service (CoS) IEEE 802.1p class of service (SPQ, WRR) Port-based CoS IP TOS precedence 802.1p VLAN Information based CoS DSCP based CoS TCP/UDP Based CoS Spanning Tree IEEE 802.1d Spanning Tree Protocol (STP) IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) VLAN Up to 200 VLANs and 4096 VLAN IDs 802.1Q tag-based VLAN Port-based VLAN Voice VLAN MAC VLAN GVRP IPV6 IPv6 over Ethernet (RFC 2464) Dual-stack (RFC 4213) ICMPv6 (RFC 4884) Neighbor discovery (RFC 4861) Auto configuration Static IPv6 address and prefix length Static IPv6 default gateway IPv6 duplicate address detection Port Trunking IEEE 802.3ad LACP Trunk-Static trunk up to 8 trunk groups IGMP Snooping IGMP v1/v2/v3 snooping Mirror Port mirroringboth on ingress and egress traffic Security RADIUS AAA Management Access Authentication Manager Port Security Protected Port Storm Control DoS Dynamic ARP Inspection DHCP Snooping IP Source Guard Management User Interface: Web-based management User Account: Login account configuration Firmware Upgrade: Firmware upgrade by WEB Syslog: Support event log, alarm log and security log ENVIRONMENT Temperature Operating: 0 ~50°C Storage: -40 ~ 70°C Humidity (Non-condensing) Operating: 10 ~ 90% Storage: 10 ~ 90% STANDARDS COMPLIANCE Standards IEEE 802.3 10BaseT Ethernet IEEE 802.3u 100BaseTX Fast Ethernet IEEE 802.3ab 1000BaseT Gigabit Ethernet IEEE 802.3z 1000BaseSX/LX IEEE 802.3af Power over Ethernet (PoE) IEEE 802.3at Power over Ethernet Plus (PoE ) IEEE 802.3x Full-duplex and flow control IEEE 802.1p Quality of Service (QoS) IEEE 802.1x Port-based Network Access Control(PNAC) IEEE 802.1Q Virtual LANs VLANs IEEE 802.1d Spanning Tree Protocol(STP) IEEE 802.1w Rapid Spanning Tree Protocol(RSTP) IEEE 802.3ad Link Aggregation Control Protocol (LACP) IEEE 802.3az Energy Efficient Ethernet Certifications FCC Class A, CE *Maximum performance, actual data rates, and coveragewill vary depending on network conditions and environmental factors. *Actual viewing resolution and frame rate of network cameras depend on connection speed. *Product specifications and design are subject to changewithout notice.
DOWNLOADS
Datasheet PDF file
Manual PDF file
Weight: 5.30 kg