K-106-480S 4G DIALLER GEN2 WITH SIM UNLOCKED 4G SIM

DESCRIPTION

OVERVIEW

K-106-480S 4G DIALLER GEN2 WITH SIM (UNLOCKED)

The Ness 4G Dialler provides a 4G pathway for alarm diallers to communicate in the absence of a landline.

This unit provides support for any dialler that reports to any Central Monitoring Station (without a need to any special control room receiver) or can dial an alarm event to a personal number, in the same fashion as it would if a landline was available.

Also includes a backup battery to allow operation in the event of mains power failure.

No programming of of the device is required, just plug and go.

Supplied with plug pack power supply, telephone lead, 4G Antenna.

This product is not network locked. Includes a NESS SIM card for your convenience. Activate the SIM on a Ness plan or BYO SIM.

IMPORTANT NOTES

This product is designed to provide a cellular pathway for alarm control panels with PSTN diallers in the absence of landlines.

Not intended for industrial use.

Not recommended for use in lift cars or other non-stationary situations.

Ensure that the location has adequate cellular signal and test operation after installation.

The unit must be tested weekly to verify cellular reception and correct operation.

The 12V plug pack supplied must be used. Do not connect to an unregulated or 'noisy' power supply.

FEATURES

Plug-and-go operation - no programming required Antenna with magnetic base supplied - long cable allows the unit to be installed in a secure housing Compatible with all Ness landline control panels and most third party panels LCD status display 12V Plug pack powered (included) Onboard battery backup Available with or without Ness SIM Choose to take advantage of competitive N

SPECS

Cellular Compatibility 4GLTE FDD: B1/B2/B3/B4/B5/B7/B8/B28LTE-TDD: B40LTE Category LTE module optimised for M2M and IoT applicationsAudio via 4G support Digital Audio and VoLTESIM Card Standard size SIM, Ness SIM supplied with K-106-480S (Unlocked)Alarm Panel Compatibility Compatible with all Ness PSTN alarm diallers in Contact ID DTMF and Voice formatsOperating voltage 12VDC plug pack suppliedBattery Backup Internal rechargeable batteryBattery backup time max. 2~3 hrsPower consumption 25mA (standby), 300mA (communicating)Antenna 3dB whip with magnetic base, 2.9m cable lengthDimensions 160 x 100 x 40mmWeight 370gOperating Temperature 0°C to 50°C
Weight: 0.4350 kg