DESCRIPTION
Lely Power Harrow Roterra 35 / 45 Series
The
Lely Roterra 35 – 45 Series Power Harrow is a
new design with a heavy modular3-point hitch and reinforced roller
arms.There is a large distance between the bearings in the trough,
which means the bearings are subject to less forces, resulting in extra
stability. This extends the lifespan of the bearing sand large forces
can easily be absorbed.
Tines are hardened in 5 zones for extra toughness and extended
lifespan. In the top region the tines are very tough while, with a transition from the middle, the tines get harder and more
wear-resistant. This makes the Tulip club tine extra durable and at the
same time tough enough to handle the most extreme conditions. It has
the widest range of gear sets available on the market. An optimal rotor speed can be set in all soil conditions. It is always possible to work
with the most efficient engine speed of the tractor.
There are 4
rotors per metre for alow power requirement and thus fuel
saving.Adjacent rotors overlap each other. It has reinforced roller
arms with 20 mmpins and floating system with many settings. The new
design heavy modular3-point hitch has a compact build and linkage. Many
ways to mount are provided.Optional: the hydraulic linkage provides
the ability for a compact mounting of Roterra and seed drill that makes
driving on the road safer.
A spring-loaded rotor guard ensures that stonest hat come in front of
the machine are pushed down and so the rotors are protected. If a stone
would end up between rotors and the rotor guard, it can pivot forwards
to let the stone pass through the machine.
The Walter scheid PTO shaft with cam-type-cut-out clutch or optional
Tulipmatic shearpin automat. The advantage of the Tulipmatic is that
time after time,after overload the connection is broken at the exact
specified moment. This reduces thechance of damage as a result
of overloading the machine.
The side deflectors are adjustable so that a perfect connection with
the previous working pass is obtained.They are also foldable for road
transport.This way a Roterra 300 stays 300cmduring road transport.
The dragging club tines have a special round shape. The shape avoids
smearing ofthe soil, and clods are broken up without the natural
layers of the soil structure beingaffected. Furthermore the dragging
position keeps the lower layers of soil where theyare, and stones are
pushed downwards rather than upwards. Due to the round shapeof the
tine, fuel is saved because not once the tine will have a flat surface
facing thedriving direction. This makes the Roterra pull much lighter.
Standard specification
- Club tines (max. working depth 240 mm) with side-fixation for quick exchange with the help of an air key
• Up to 352: three point headstock with square support beams (80×80 mm)
• Up from 402: heavy three point headstock 55-series with heavy duty square support beams (100×100 mm)
• Floating suspension of rotor guard
• Rigid torsion-free geartrough with a flanged lid for a long life
• 35 Series: reinforced gearbox (central drive) suitable for 540 and 1000 rpm (standard)
• 45 Series: heavy duty gearbox (no central drive) suitable for 1000 rpm
• 35 Series: set of gears 15/20 at 1000 rpm
• 45 Series: set of gears 20/15 at 1000 rpm
• Up to 352: floating system with crumbler roller ? 440 mm
• Up from 402: floating system with crumbler roller ? 520 mm
• Foldable soil deflectors, adjustable both horizontally and vertically
• Walter scheid PTO shaft with cam-type-cut-out clutch (1 3/8” – 6 splines at tractor side)
.
Special benefits
- Patented club tines: due to the shape, side-fixation, material and
production technique, the tines guarantee high quality and long life.
These club tines are fitted by a single allen headed socket bolt and an unique captivated self locking nut. Because the bolt is accessible from
the side, the tines can quickly and easily be changed thanks to the Easy lock system by means of a power tool or socket. Fuel saving up to
20% in comparison with knife tines.
• Heavy duty rigid torsion-free gear trough with flanges lid, large
diameter shafts and bearings as well as a large spacing between the top
and bottom bearings.
• Gear trough completely sealed to ensure no contamination of the drive
gear lubrication. Incorporating self lubricating, double sealed, heavy
duty bearings.
• Patented spring-loaded rotor guard: stones and other objects are pushed down and can pass through the rotating tines.
• Foldable floating soil deflector: working width = transport width.
• Floating system: if necessary, the Roterra power harrow can break out
upwards independently from the roller.The roller continues to follow
the ground.
• Rigid portal head stock: centre of gravity is positioned closely to the
tractor, makes working with a less powerful tractor possible.
• Rotor speed: quickly and easily changeable gears.
• Compact engineered: headstock and support frame suitable to mount
secondary equipment like seed drills or planters, offers seeding or
planting in one pass.
.
Points of interest
• For the Roterra 302 and 352 the heavy linkage of the 402/452-45 has be
ordered if also the headstock of the55 series is ordered (article
number 705-930-057).
• For machines without central drive (45 series) which are used in
combination with a seed drill a shearpinautomat Tulipmatic is
recommended.
• Shearpin automat Tulipmatic is recommended in soil with stones.
• The mentioned powers are measured on the PTO-shaft.