DESCRIPTION
Samasz Disc Mower – MEGACUT Combinations
The Samasz MegaCUT is a set of mowers for demanding farmers, who
value their time and money. Working capacity from 10 ha/h and low power
demand prove, that the combination can be operated even on middle farms
with tractor from 150 HP. It is an excellent alternative to expensive
self-propelled mowers.
MegaCUT set is an ideal solution for large farms. Their high capacity
and working width prove that mowing even large areas does not take up
time. MegaCUT consists of 3 mowers: front KDF 300 and 2 rear mowers
suspended on joint frame (KDD 861/941).
Central suspension
Mowers in Mega CUT sets are centrally suspended, which enables
perfect ground following, even weight balance on the ground and optimum
operation in every condition.
Equipment and advantages of MegaCUT mowers:
- Cutting units are equipped with Perfect CUT cutterbars with quick knife replacement
- Lightening of centrally suspended cutting units by means of springs in standard equipment
- Hydropneumatis suspension in optional equipment
- Hydraulic breakaway device safety protecting the mower in case of coming into immovable obstacle
- New integrated cutterbar gearbox
- Hardened suspension frame
- PTO shaft with overruning friction clutch to drive cutterbars in standard equipment
- Adjustable swath guides
- justable front safety guards and lifted side guards
- Mechanical lock of cutting units in transport position
- Linkage frame adjusted to II and III cat.
- Practical tool box
PERFECT CUT
Based on the experience of our customers in Poland and in Western
Europe we have introduced to our production a new model of cutterbar:
Perfect CUT. Precise cut, high durability of components, protection
against sudden disc stop in case of coming into an obstacle, quick and
easy disc module replacement owing to modernized upper disc hub are the
main advantages of Perfect CUT cutterbars. New cutterbar is mounted in
every SaMASZ disc mower apart from KDL series based on Comer cutterbar.
Main advantages of PerfectCUT cutterbar:
1.Smooth regulation of cutting height from 4 to 7 cm.- sliding skids from 5 to 9 cm
2.6307 2RSN bearings in bevel gears and 6307 2RS in
disc modules are the most durable and unprecedented among our european
competion.
3.Specially hardened discs and sliding skids made of Boron steel, protected against mud and dirt by means of the blades.
4.Easily replaceable knife holder pins.
5.Hardened knife holder made of Boron steel, especially designed in order to eliminate stucking of the knives under the disc.
6.Innovative system of quick knife replacement. The
knife can be changed only when the disc is adjusted sheer to the
cutterbar (+ – 30 degrees). The system decreases the probability of
knife loss almost to absolute minimum in case of hitting into stone.
7.Modernized, hardened sliding skids made of Boron
steel protect the whole surface of cutterbar on the bottom. Quick and
easy replacement of the skids (only two bolts to unscrew).
8.Additional steel skid protecting cutterbar’s drive.
9.Hardened cutterbar made of steel.
10.Protection against stones in standard equipment.
11.Quick and easy replacement of disc module thanks to modernized upper hub.
12.Bevel gears with 25 mm tightness.
13.High quality knives comply with strict safety rules. SaMASZ logo engraved on the knife is a guarantee of its quality.