New Endress+Hauser DN300, Proline Promag W 400 Electromagnetic Flowmeter

DESCRIPTION

The world's first electromagnetic flowmeter for unrestricted measurement.
The best-performing flowmeter for all applications in water distribution as well as wastewater treatment.

Made in France by Endress+Hauser.

FEATURES & BENEFITS:

* The first and only electromagnetic flowmeter with no inlet and outlet runs (0 x DN) as well as no pipe restriction (full-bore design) and thus no pressure loss.
* Measure reliably independent of flow profile and mounting location.
* Installation directly after bends, perfect for space-restricted areas and on skids.
* Industry-optimized flowmeter with internationally recognized drinking water approvals.
* Heartbeat Verification for reliable fulfillment of traceability requirements in accordance with ISO 9001.
* Reliable measured values thanks to innovative signal analysis and processing.
* Based on tried-and-tested sensors: installed successfully in over 3 million applications since 1977.

SPECIFICATIONS:

* Measuring principle: Electromagnetic.
* Measured variables: Volume flow, conductivity, mass flow.
* Measuring / Flow range (Qmax): 40,000 L/min = 2,400 m3/h (10,567gal/min).

Sensor features:
* EN ISO 12944 corrosion protection for underground or underwater installation.
* International drinking water approvals.
* Degree of protection IP68 (Type 6P enclosure).
* Approved for custody transfer to MI-001/OIML R49.

Transmitter features:
* Safe operation no need to open the device due to display with touch control, background lighting.
* Timesaving local operation without additional software and hardware integrated web server.
* Integrated verification Heartbeat Technology.
* Transmitter housing made of durable polycarbonate or aluminium.
* WLAN access. Integrated data logger: measured values monitoring.

Wetted materials:
* Liner material hard rubber: 0 to +80 °C (+32 to +176 °F)
* Liner material polyurethane: 20 to +50 °C (4 to +122 °F)
* Liner material PTFE: 20 to +90 °C (4 to +194 °F)
* Electrodes: 1.4435 (316L); Alloy C22, 2.4602 (UNS N06022); Tantalum

Max. measurement error:
* Volume flow (standard): ±0.5 % o.r. ± 1 mm/s (0.04 in/s)
* Volume flow (option): ±0.2 % o.r. ± 2 mm/s (0.08 in/s), Flat Spec

* Sensor housing material: AlSi10Mg, coated.
* Transmitter housing material: Polycarbonate; AlSi10Mg, coated.

* Display/Operation: 4line backlit display with touch control (operation from outside), Configuration via local display, web browser and operating tools possible.

* Outputs: 020 mA/420 mA HART (active), Pulse/frequency/switch output (passive), Pulse/frequency output (passive), Switch output (passive).

* Digital communication: HART, PROFIBUS DP, EtherNet/IP, Modbus RS485.

* Hygienic approvals and certificates: Drinking water approval: ACS, KTW/W270, NSF 61, WRAS BS 6920.

Product Page:
Video:
Data Sheet:
Technical Information:
Operating Instructions:
Overall Dimensions (with meter & cables inside): 455mm Wide, 494mm Long, 590mm High.
Weight: 68kg.

Call if you would like to discuss or to come inspect it.

We are at
You can pick up, we can deliver to a reasonable distance for an agreed fee, or we can arrange freight within Australia.