Midi Fuse MDB Power Distribution Module Up to 3 Fuses SKU - 4980933
$99.00
DESCRIPTION
PDM Module kit includes1 x Base with tethered cover seal.
1 x Busbar power up to 3 fuses from a single input cable.
6 x Nuts to secure up to 3 Midi fuses.
6 x Cable seals of assorted sizes.
1 x Cavity plug (required if you only install 2 x Midi fuses).
2 x Cable seal caps to secure cable seals into unit.
4 x Screws to secure 2 spare fuses to inside cover.
1 x Instruction sheet.
Module kit does not include Midi Fuses
Made in the USA
The Littelfuse MDB series is an internally bussed, water-proof and dust-proof fuse holder developed for high current loads, and harsh conditions.
The unit is wellsuited for near-the-battery applications and can be mounted in exposed locations to fit your design.
A single input power cable connects to a 3 pole busbar to feed either 2 or 3 Midi fuse protected output cables.
Eliminates splices multiple fuse holders. In addition, 2 spare Midi fuses can be fitted to the inside of the cover using the included screws.
Very high IP Rating.
Voltage: 58VDC max.
Maximum Total Current: 200A
Wire Size: 16 or 25mm2 (input cable), 6 to 16mm2 (output cables)
Temperature Rating: -40°C to + 85°C.
Body Cover: UL 94-V0.
IP69K Ingress Protection Rating: IP67 when cover, cable seals , caps
are installed. Cables must not exceed the minimum bend radius advised in
the included instruction sheet to ensure seal integrity.
Cavity Plug: Included cavity plug must be fitted if using only 2 x Midi fuses.
Mounting: Surface mount using 3 fixing holes (M6 or 0.25 Fuse: Midi fuses.
Does not include Midi Fuses
-
SKU: 4980933
Visit our website to view thousands more products like this and order online at:
Visit Website
ADDITIONAL INFORMATION
- Price
- $99.00
- Condition
- New
- Delivers To
- Australia Wide
