Littlefuse ZCase 3 Way Bussed Fuse Bar Holder with Cover SKU - 0FHZ00853-BX

DESCRIPTION

Voltage: 32VDC
Rating: 275A max continuous.
Fuse Terminal Stud : Torque: M8 12 to 16 Nm
Mounting: Top Post Positive 19mm.
Kit Contents: Includes Battery Bar, Fuse Bar, Cover, S/S Nuts Washers.
Operating . Temp : -40C to 125C.
Notes: Fuses not included. Zcase.
Mounts directly to a post style of battery
Available in 2 or 3 pole designs
Uses ZCASE single Fuses (M8) available 40-600A
Maximum continuous throughput 275A
Unlike other battery mount holders the BMZ series does not require a special nut due to isolated bus bar studs and can be installed using standard M8 nuts (sold separately)
Fusing directly at the battery allows location of larger power distribution boxes outside of the engine compartment while assuring protection of the
supply cables
The BMZ post mount fuse holder features a compact design which saves space and eliminates the need to wire in a separate fuse holder or power distribution module.
Additional circuits are added to the battery directly on top of the ZCASE fuse with wired ring terminals
Installation
Place the appropriate Z-Case fuses (M8) onto the isolated studs. On the 3-way bus bar the highest value fuse should be put in the center position to minimize the length of the
electrical path.
Remember when selecting fuse values the continuous current through a fuse should be calculated as 75% of the rated value of the fuse (200A fuse should carry 150A max continuous current).
The total long term continuous current for all fuses should not exceed 275A.
Intermittent loads such as motor start, starter or compressor should not exceed 400A for 20 seconds.
-
SKU: 0FHZ00853-BX
Visit our website to view thousands more products like this and order online at:
Visit Website