Mounted Flap Wheel 40 x 20 6mm Shank Aluminium Oxide 80 Grit 44408086

DESCRIPTION

MOUNTED FLAP WHEEL 40 X 20 6MM SHANK ALUMINIUM OXIDE 80 GRIT 44408086

Fan Grinder Aluminium Oxide - 6mm Shank F 4020/6 A 80 Grit

Advantages:
- High flexibility
- High stock removal due to the aggressive coated abrasive
- Carrier material wears off uniformly and without residue on the workpiece surface, meaning that sharp abrasive grit is exposed at all times
- Due to the flat cast core construction, the face of the mounted flap wheels can be used to work very close to edges and in corners

Recommendations for use:

Mounted flap wheels achieve their best performance at a recommended cutting speed of 15Ð20 m/s. This provides an ideal compromise between stock removal, surface quality, thermal load on the workpiece and tool wear.
 Flexible shafts, electric and air-powered straight grinders can be used as tool drives
 Use grinding oil that is suitable for the material in order to significantly increase the tool life and the abrasive performance of the tools.
Safety notes:
For safety reasons, it is imperative to remain within the stated maximum permitted rotational speed at all times
 Safety is only guaranteed if:
The clamping depth is at least 15 mm
The specified maximum rotational speed for unsupported shank lengths is not exceeded
Part Number/SKU: 44408086

* Product Images are for illustration purposes only, unless otherwise specified colour may be different.