Universal Metal Protector Soft Cote UMP 300g Molytec M910
Universal Metal Protector Soft Cote UMP 300g Molytec M910
$29.70
DESCRIPTION
UNIVERSAL METAL PROTECTOR SOFT COTE UMP 300G MOLYTEC M910
Molytec UMP is a universal metal protector - soft cote. It provides a premium heavy-duty waxy film for long term protection. Seals from moisture and corrosive contaminants. Highly Resistant to chemicals, salt water, humidity and corrosive environments. Easily washes off, can be removed with Brake & Parts Cleaner (see pg. 7) Will not effect painted surfaces, rubbers, plastics and insulation materials. Temp range -20c to +100c.Â
Molytec UMP provides a dry transparent, heavy duty waxy film for protection of parts.
Features and BenefitsÂ
Â
âWhen the Molytec UMP is applied on metal surfaces, the waxy film protect the components from adverse conditions such as salts spray, corrosive atmosphere and chemicals. Applying just 1 layer of UMP can provide up to 2 years protection.
Highly Resistant to
 Chemicals Salt Water  Humidity  Wash Off  Corrosive Environments
Specification and Approvals Performance Characteristics
 Type of Film Waxy, dry film  Viscosity (20oC) 0.87 + 0.05  Film Thickness 0.5 â 2ml dry  Drying time Approx. 1 hour to touch  Coverage (25 Micron) 20 square metres/1 Litre  Corrosion Resistance Up to 1 year outdoors / 2yrs indoors
Directions
 Shake can well before use.  Mask area not to be sprayed.  Best results are obtained when sprayed above 150C. Spray from a distance of 30 to 35cm in light, even coats. Additional coats for added protection may be applied after each coat dries.  When finished spraying, clean valve by turning can upside down and pressing actuator until only propellant escapes. Do not use on energised equipment.  Remove with aliphatic petroleum solvents or mineral spirits.
Disposal
Disposal requirements vary by state and local regulations. All used and unused product should be disposed of in conformance with local, state and commonwealth laws and regulations.
Special Use Warnings Aerosol Cans Do not puncture, incinerate or store above 500C. Exposure to high temperatures may cause can to burst. Do not place in direct sunlight or near any heat source. Aerosol cans will conduct electricity. Keep away from all live electrical sources including battery terminals, solenoids, electrical panels and other electronic components. Failure to observe this warning may result in serious injury from flash fire and/or electric shock. General Use only in well ventilated area. Ventilation may be improved by opening a window or door or providing mechanical assistance. Avoid continuous breathing of vapour and spray mist. Avoid contact with skin and eyes. If ventilation is not adequate, respiratory protection should be worn.
For more information regarding short term and long term exposure, review this productâs Material Safety Data Sheet.
 Part Number/SKU: M910
* Product Images are for illustration purposes only, unless otherwise specified colour may be different.
ADDITIONAL INFORMATION
Price
$29.70
Location
Australia
Condition
New
Delivers To
Australia Wide
YOU MAY ALSO LIKE
Comidisc 50mm CDR 50 A 80g Aluminium Oxide Pferd 42770508
Comidisc 50mm CDR 50 A 80g Aluminium Oxide Pferd 42770508 Â COMBIDISC Abrasive Disc - Aluminium Oxide - Type CDR 50 A...
You can check your conversation between the seller and you in
My Messages. Keep yourself safe. Always meet in person and never send or wire money.
Click here to learn more.