Capacitor Discharge Stud Welder CD1000

DESCRIPTION

CAPACITOR DISCHARGE STUD WELDER CD1000

Designed specifically for the insulation industry
 
The CD1000 is designed specifically for the insulation industry. The Pin Welders robust and reliable design has performed efficiently and reliably for many years under the stress of on-site and workshop conditions.
 
The unique chuck guard design has the following advantages:
1. No adjustment necessary for different length pins.
2. Protects chuck from zinc splashing during welding, therefore increasing the life of the chuck.
3. Because of the self-tightening effect between the chuck and the chuck guard, arcing between the chuck and the pin is minimal

Technical Data

 STUD SIZE  .105" insulation pin through 5/32 whit or M4 threaded studs
 STUD MATERIAL  Mild steel, stainless steel. Zinc, galvanised and copper finished.
 WEIGHT  16 kgs
 SIZE(L.W.H)  315 mm x 436 mm x 245 mm
 WELDING RATE  15 per minute
 INPUT POWER  240V A.C.
 WELD MODE  Contact
 CIRCUIT PROTECTION

 Primary fuses

Output voltage; circuit breaker operator protection.
 CABLE LENGTH  Gun 4.8m (16')
 Earth  3.04m (10')

Details 

 SPEED OF OPERATION  Welding time is less than 0.0002 seconds. Fifteen welds per minute possible.
 COST SAVING  Speed of operation and portability cut costs up to 10 times compared with conventional methods, drilling tapping etc. Material saving by virtue of simpler design.
RELIABILITY   Robust construction and solid state components insure long life and dependability in harsh working environment.
 NO REVERSE SIDE MARKING No distortion or burning. Therefore no reworking on the reverse side.
 SIMPLE TO OPERATE  Unskilled operators are all that is needed. No flux, ferrules or inert gas required.
 SAFE  No arc flash. Fully insulated gun, 14V DC operation. Internal safety circuit to protect operator.

 

CD1000 Brochure
Part Number/SKU: CD1000

* Product Images are for illustration purposes only, unless otherwise specified colour may be different.