KE-4 BASIC KIT 2 Engine 3 Station 12V 3 twin levers

DESCRIPTION

How to Order the KE-4 Electronic Engine Control System:

Specifying and ordering a KE-4 electronic engine control system is a three part process. To correctly specify a system from the guides below, you will need to know, number of engines, number of stations to be installed and boat circuit voltage.

Part 1:
Kit includes control head(s), control unit(s), actuator(s) and power supply harnesses.

Control Head, 306252-56
The dual function, hand lever control unit that activates the operation of both gear and throttle functions. Supplied standard with a gold cover trim - other colours available, refer accessories.

Control Unit, 306268 12v - 306270 24v
Electronic processor box with plug-in connectors for control head(s), power supply and actuator(s).

Actuator, 306260
The electrical/mechanical change over box. Supplied with a 1.8 metre wiring harness that connects the actuator to the control unit. Mechanical cables (purchased separately) are required to connect the actuator to the throttle and gear linkages (see part 3).

Power Supply Harness, 309955
Connects the control unit to the batteries. Harness length is five metres.

" for further information. View Product PDF Enter "



Also required:

Part 2:
Remote Control Harness, 306304-30
Connects the control head to the control unit. Available in lengths from 4 to 30 metres. Each lever on the control head requires a remote control harness, eg a single lever control head requires one remote control harness, a twin lever control head requires two remote control harnesses. Select the lengths required.

Part 3:
Mechanical Control Cables
Cables such as CC633, SP33C, CC330 or 33C, connect the actuator to the engine(s) throttle and gear linkages. Short length cables are recommended as the Actuator should be installed as close as is possible to the engines. One throttle and one shift cable are required per engine.

Refer to related products for Parts 2 and 3 to complete selection.